Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的9指南

英语
西班牙语

正翻译步骤 1

Step 1
Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board. Bend the battery cable slightly away from the logic board so the connector will not accidentally contact its socket.
  • Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board.

  • Bend the battery cable slightly away from the logic board so the connector will not accidentally contact its socket.

Utiliza la parte plana de un spudger con un movimiento de palanca hacia arriba para retirar ambos lados del conector de la batería del socket de la tarjeta madre.

Dobla ligeramente el conector de la batería hacia arriba para evitar que accidentalmente haga contacto con el socket.

在开源创作共享许可协议下,你的投稿已被许可