跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的23指南

英语
中文

正翻译步骤 11

Step 11
In the next four steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board. Use a spudger or a fingernail to disconnect the front-facing camera and sensor cable connector.
  • In the next four steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board.

  • Use a spudger or a fingernail to disconnect the front-facing camera and sensor cable connector.

在接下来的四个步骤中,使用撬棒时注意只撬排线接口,而不是接口插座。

使用撬棒或手指甲断开前摄像头和传感器排线接口。

在开源创作共享许可协议下,你的投稿已被许可