菜单

你的设置

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的23指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 4

Step 4
Open the iPhone by swinging the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge. Several clips along the top edge of the front panel form a partial hinge. During reassembly, align the clips just below the top edge of the rear case. Then, slide the front panel upward until its top edge is flush with that of the rear case.
Opening up the phone

  • Open the iPhone by swinging the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge.

  • Several clips along the top edge of the front panel form a partial hinge.

  • During reassembly, align the clips just below the top edge of the rear case. Then, slide the front panel upward until its top edge is flush with that of the rear case.

打开手机

以屏幕顶端为支点，从屏幕底端掀起前面板。

顶部边缘的数个卡扣会起到类似铰链的作用。

重新组装前面板时，将前面板的卡口对齐机身顶部，然后将前面板向屏幕顶部滑动，直到其上端与机身后盖完全扣合。

在开源创作共享许可协议下，你的投稿已被许可。