跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
中文

正翻译步骤 4

步骤 4
On the bottom of the device, pry out the three rubber feet covers with the metal spudger. Remove the four black 36.3mm long screws underneath with a Phillips #1 screwdriver.
  • On the bottom of the device, pry out the three rubber feet covers with the metal spudger.

  • Remove the four black 36.3mm long screws underneath with a Phillips #1 screwdriver.

  • One screw is located underneath the warranty sticker. This sticker can either be peeled off or punctured through with a screwdriver.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可