跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 14

步骤 14
If your replacement part did not come with the mute switch cover, you will need to remove the switch cover and transfer It. Use the flat end of the spudger to press down and hold the old bracket firmly in place. Use tweezers or your fingers to carefully rock the switch cover such that the switch cover pins swing out of their clips.
  • If your replacement part did not come with the mute switch cover, you will need to remove the switch cover and transfer It.

  • Use the flat end of the spudger to press down and hold the old bracket firmly in place.

  • Use tweezers or your fingers to carefully rock the switch cover such that the switch cover pins swing out of their clips.

  • Lift the switch cover straight up.

  • To install the mute switch cover onto the new upper cable assembly, reverse the steps.

  • The pins are supposed to rest near the clip opening. Do no attempt to force the pins far into the clips. The switch cover will be held securely in place once you screw the bracket back onto the case.

  • The switch cover goes on in only one orientation. If you are having a hard time getting the switch cover onto the new part, try toggling the switch so that the black protruding lever is in a different position.

  • Before reassembling the phone, check all switches and buttons to see if they physically work.

如果你的替换件不包含静音开关的盖子,你需要取下原来的开关盖并将它转移。

使用撬棒扁平的末端紧紧地按住并固定旧的元件。

用镊子或手指小心摇动开关盖,使开关盖从夹子中摆出。

竖直向上提起开关盖。

要将静音开关盖安装到新的上部电缆组件上,请逆序执行这些步骤。

应该将销钉放在夹子开口附近。不要试图将销钉推入夹子中。将支架拧回到外壳上后,开关盖将牢固地固定到位。

开关盖仅能在一个方向上打开。如果您很难将开关盖板安装到新部件上,请尝试拨动开关,使黑色突出杆处于不同位置。

在重新组装手机之前,请检查所有开关和按钮,看看它们是否正常工作。

在开源创作共享许可协议下,你的投稿已被许可