正翻译步骤 5
步骤 5
-
With the bottom cover removed the hard drive and RAM are easily accessible.
-
The hard drive is held in only by friction,
-
To remove the hard drive from its mount lift the drive a bit from the end near the data and power cables
-
Disconnect the power and data cables, the cable is a delicate ribbon cable so be gentle, don't pull it out or the way too far.
-
Lift the cable end a bit more and slide the drive towards the ram a bit to release the clips holding down the other end.
-
the mounting frame can just be pulled free from the drive, it is also only attached by friction.
您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)的著作权利。