HTC Vive拆解

英语

中文

上一步下一步

正翻译步骤 13

步骤 13

HTC Vive Teardown: 步骤 0 中的图像 1，3

HTC Vive Teardown: 步骤 0 中的图像 2，3

HTC Vive Teardown: 步骤 0 中的图像 3，3

Next out: the midframe that housed the motherboard. Clinging to its side we find a small ribbon cable that plays host to the headset button.
There are many Texas Instruments TLV70233 300 mA / 3.3 V LDO Regulators on the flex cable around the midframe.
A closer look at the midframe reveals a slot for the little black nub on the back of the left display panel.
This slot allows the nub to peek through and slide along that white Teflon strip, activating a linear potentiometer, used to track IPD position as you adjust the displays.
Ready to go deeper, we remove the twin lens-and-display assemblies from their housing and peel off the rubber light-gasket from around the lenses.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。