跳转到主内容
英语
中文

正翻译步骤 8

步骤 8
Now you can remove and manipulate the circuit board.  There is one last wire attaching it to the other board, but it is difficult and unnecessary to remove. Locate any capacitors that are blown.  The tops will be rounded rather than flat or could have dried orange fluid spilling from the tops.  These need to be replaced.  Identify their capacitance and voltage and remember these. Using a soldering iron and desoldering tape, remove the solder attaching any blown capacitors.
Removing the capacitors
  • Now you can remove and manipulate the circuit board. There is one last wire attaching it to the other board, but it is difficult and unnecessary to remove.

  • Locate any capacitors that are blown. The tops will be rounded rather than flat or could have dried orange fluid spilling from the tops. These need to be replaced. Identify their capacitance and voltage and remember these.

  • Using a soldering iron and desoldering tape, remove the solder attaching any blown capacitors.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可