跳转到主内容
英语
中文

正翻译步骤 35

步骤 35
Use a spudger to pry the metal rings on the battery terminals up so that they perpendicular to the battery terminals. These rings should be on the same end as the surface mount leads. If they are on opposite ends, the board is on backwards, and you'll need to unscrew the nuts, rotate the circuit board 180°, reinstall the nuts, and tighten the two screws.
  • Use a spudger to pry the metal rings on the battery terminals up so that they perpendicular to the battery terminals.

  • These rings should be on the same end as the surface mount leads. If they are on opposite ends, the board is on backwards, and you'll need to unscrew the nuts, rotate the circuit board 180°, reinstall the nuts, and tighten the two screws.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可