跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 7

步骤 7
Pry up the rear panel by pulling the dental pick clockwise in a quick motion. Apply force perpendicular to the plane of the display assembly. You may be afraid to go fast, but going slowly is more likely to bend the case.
  • Pry up the rear panel by pulling the dental pick clockwise in a quick motion. Apply force perpendicular to the plane of the display assembly. You may be afraid to go fast, but going slowly is more likely to bend the case.

  • The rear panel is still attached to the iPhone by the headphone jack cable, so don't entirely remove the rear panel from the iPhone just yet.

顺时针方向快速拉动牙签,撬起后面板。向着垂直于显示器组件的方向施加力。 您可能会害怕动作过快,但走得更慢可能会使后壳弯曲。

后壳上的耳机插孔电缆连接在iPhone主板上,因此暂时不要完全从iPhone上卸下后壳。

在开源创作共享许可协议下,你的投稿已被许可