跳转到主内容
英语
中文

正翻译步骤 8

步骤 8
To remove the hard drive, unscrew the two small Phillips screws holding the black plastic hard drive bracket to the chassis.  Pull up on the white plastic tab and lift the hard drive out of the case, being careful not to strain the SATA cable. Carefully disconnect the Serial ATA cable. Carefully disconnect the Serial ATA cable.
  • To remove the hard drive, unscrew the two small Phillips screws holding the black plastic hard drive bracket to the chassis. Pull up on the white plastic tab and lift the hard drive out of the case, being careful not to strain the SATA cable.

  • Carefully disconnect the Serial ATA cable.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可