跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

Step 1
The rear side of the camera is where the motherboard is located. It is visible after you have taken off the rear face plate. Remove the shield that protects it from static first.
  • The rear side of the camera is where the motherboard is located. It is visible after you have taken off the rear face plate.

  • Remove the shield that protects it from static first.

  • This shield has six Philips #00 screws that are positioned around the edge of the shield.

  • After removal of the screws the shield will come free from the motherboard.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可