iPad 2 GSM Rear Camera Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南。

英语

韩语

上一步下一步

正翻译步骤 2

步骤 2

iPad 2 GSM Rear Camera Replacement: 步骤 0 中的图像 1，3

iPad 2 GSM Rear Camera Replacement: 步骤 0 中的图像 2，3

iPad 2 GSM Rear Camera Replacement: 步骤 0 中的图像 3，3

Remove the following two screws:
One 3.3 mm Phillips screw
One 2.1 mm Phillips screw
Lift the metal retainer clip straight up from its recess in the rear panel.
If the camera comes up with the retaining clip, don't worry. Just separate the camera from the clip before reinstalling, so you can be sure to get the connector in the right place.
Be sure the small thermal pad is attached to the metal retaining clip as seen in the third picture when replacing the rear camera.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。