注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的153本指南。
-
This step requires you to move the opening pick along the bottom right edge of the front panel. The Wi-Fi antenna is very close to the corner and is easily severed if the adhesive is released improperly.
-
Do not completely remove the pick from under the front glass, but pull it out just a little bit so that ~1/8" (3 mm) of the tip is still under the front glass.
-
Slide the tip of the opening pick along the bottom edge of the iPad, releasing the adhesive over the Wi-Fi antenna.
您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)的著作权利。
指南步骤编辑键盘快捷键:
Ctrl + Shift + N
在下面插入新的一行
Ctrl + Shift + P
在上面插入新的一行
查看所有快捷键