跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
Turn the oil filter counterclockwise (when looking up at it) to remove it. If your filter is on too tight to loosen by hand, you may need to use an oil filter wrench or belt wrench to remove it. Oil will begin to run down the sides of the oil filter. It is up to your discretion to either let it drain slowly this way or take the filter off quickly. Keep in mind that no matter what, the filter itself will still have oil in it that must be drained.
Removing the Old Oil Filter
  • Turn the oil filter counterclockwise (when looking up at it) to remove it.

  • If your filter is on too tight to loosen by hand, you may need to use an oil filter wrench or belt wrench to remove it.

  • Oil will begin to run down the sides of the oil filter. It is up to your discretion to either let it drain slowly this way or take the filter off quickly. Keep in mind that no matter what, the filter itself will still have oil in it that must be drained.

  • Set the old filter in your oil drain pan with the gasket facing down to allow the oil to drain out of it.

  • Once the oil filter is removed carefully inspect the old filter and the filter seating surface on the engine for the gasket from the old filter. Sometimes this will remain in place and is a guaranteed major leak if not removed prior to installing the new filter.

  • Let the rest of the oil from the engine drain and collect in the oil drain pan.

逆时针旋转油滤(仰视)移走它。

如果油滤过紧,无法用手拧动,您可能需要油滤扳手来拧下它了。

油将开始沿着滤油器的两侧流下。 要么让它慢慢排出,要么快速拧下油滤,您自行决定。 请记住,无论什么,过滤器本身仍然会有油,必须排干。

将油滤放在排油盘中,垫圈面朝下,以使机油从其中排出。

取下旧的油滤后,注意看一下旧的油滤底座是不是在车上的油滤槽内,没有这个的话,可能会导致漏油.

让发动机的其余机油排出并收集在排油盘中。

在开源创作共享许可协议下,你的投稿已被许可