跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 3

步骤 3
Remove the 1.7 mm Phillips #000 screw securing the vibrator to the rear case. You'll have to hold the driver at a slight angle, be sure not to strip the screw as you remove it.
  • Remove the 1.7 mm Phillips #000 screw securing the vibrator to the rear case.

  • You'll have to hold the driver at a slight angle, be sure not to strip the screw as you remove it.

移除把震动器固定在后盖上的1.7mm Phillips #000 螺丝。

你需要把螺丝刀摆在一个很小的角度上,要确保在你拧的时候不弄坏螺纹。

在开源创作共享许可协议下,你的投稿已被许可