Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的32本指南

英语
中文

正翻译步骤 9

Step 9
Open the phone just enough to reveal the metal bracket covering the home button cable. Do not open the phone too far or you risk damaging the home button cable, or the socket it plugs into. Keep the cable loose—if it is stretched taut, that's too far. Only the phone's original home button assembly will be capable of using the Touch ID functionality. If you rip the cable, installing a new home button will only restore ordinary home button functions, not the Touch ID features.
Removing the Touch ID cable bracket
  • Open the phone just enough to reveal the metal bracket covering the home button cable.

  • Do not open the phone too far or you risk damaging the home button cable, or the socket it plugs into. Keep the cable loose—if it is stretched taut, that's too far.

  • Only the phone's original home button assembly will be capable of using the Touch ID functionality. If you rip the cable, installing a new home button will only restore ordinary home button functions, not the Touch ID features.

  • Use the tip of a spudger to push the bracket free and remove it with tweezers.

  • The next two steps apply to reassembly. Skip them and continue to Step 12 until reassembly.

稍微打开屏幕,可以看到盖住home键电线的挡板铁片就可以了。

千万不要把屏幕和机身分得太开,因为有一些电线依然连接着屏幕和机身,分得太开会损坏home键电线或及其接口。保持电线是松的状态——如果电线拉紧了,那么就说明分得太开。

只有手机原装的Home键组件才能使用Touch ID功能。如果你扯断这根电线,装上新的home键只能恢复home键功能,而将失去Touch ID功能。

使用手机撬棒推动松下铁片,再用镊子取下来。

接下来两步仅适用于重新组装。如不是重组,可以直接跳到第12步。

在开源创作共享许可协议下,你的投稿已被许可