跳转到主内容
英语
中文

正翻译步骤 12

步骤 12
After de-routing a couple cables and unscrewing a few #00 Phillips screws, we were able to remove two antennas and the I/O wall from the logic board. The antennas are attached to the plastic I/O wall since wireless signals don't transmit well through metal. Ah ha, we meet again L-block.
  • After de-routing a couple cables and unscrewing a few #00 Phillips screws, we were able to remove two antennas and the I/O wall from the logic board.

  • The antennas are attached to the plastic I/O wall since wireless signals don't transmit well through metal.

  • Ah ha, we meet again L-block.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可