跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 2

步骤 2
Then next step is removing the seven Philips #00 screws that hold the rear face plate on. There are screws hidden in three separate spots. One is under the rubber doors on the left side of the camera. the next one at the eye hole.
  • Then next step is removing the seven Philips #00 screws that hold the rear face plate on.

  • There are screws hidden in three separate spots.

  • One is under the rubber doors on the left side of the camera. the next one at the eye hole.

  • The final one involves taking off the small dial that is about half an inch to the right of the eye hole.

  • Removing this dial involves putting a spungder tool behind it and applying a gradual amount of pressure.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可