跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
日语

正翻译步骤 2

步骤 2
Disconnect the set of wires from the back casing to the motherboard. Do this by using the plastic spundger  to flip the black tab up and the wires will pull out. Unscrew the four 3 mm and two silver 1 mm PH000 screw from the green logic board
  • Disconnect the set of wires from the back casing to the motherboard. Do this by using the plastic spundger to flip the black tab up and the wires will pull out.

  • Unscrew the four 3 mm and two silver 1 mm PH000 screw from the green logic board

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可