跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

步骤 1
Remove the 7 screws on the outside of the camera Two 5 mm PH000 screws on the right side of the camera body Four 3mm PH000 screws on the bottom  and the left side of the camera body.
  • Remove the 7 screws on the outside of the camera

  • Two 5 mm PH000 screws on the right side of the camera body

  • Four 3mm PH000 screws on the bottom and the left side of the camera body.

  • Use the plastic spundger to push the back casing out. Start from the right side and work your way clockwise around the case.

  • The HDMI / AV tab might fall out. this is supposed to happen as it is not screwed into place in the back casing.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可