修复你的物品 社区 商店

更换微软Surface Pro 4的散热片

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的9指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 3

步骤 3
Microsoft Surface Pro 4 Heat Sink Replacement, Unscrew the heat sink: 步骤 0 中的图像 1，1
Unscrew the heat sink

  • Use a T3 Torx screwdriver to remove two screws from the heat sink:

  • One 2.4 mm screw along the top of the rectangular plate covering the battery.

  • Make sure you don't lose this bracket, as it might separate from the heatsink.

  • One 2.2 mm screw along the bottom of the rectangular plate covering the battery

拧下散热槽

使用 T3 Torx 螺丝刀从散热器上卸下两颗螺丝：

沿着覆盖电池的矩形板顶部的一个 2.4 毫米螺丝

沿着覆盖电池的矩形板底部一颗 2.2 毫米螺丝

[title] Unscrew the heat sink
[* black] Use a T3 Torx screwdriver to remove two screws from the heat sink:
- [* red] One 2.4 mm screw along the top of the rectangular plate covering the battery
+ [* red] One 2.4 mm screw along the top of the rectangular plate covering the battery.
+ [* icon_note] Make sure you don't lose this bracket, as it might separate from the heatsink.
[* orange] One 2.2 mm screw along the bottom of the rectangular plate covering the battery

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。