跳转到主内容
英语
荷兰语

正翻译步骤 2

步骤 2
Using a hair dryer or a heat gun, heat up the adhesive that attaches the display to the housing. The adhesive lies around the edges of the display.
  • Using a hair dryer or a heat gun, heat up the adhesive that attaches the display to the housing. The adhesive lies around the edges of the display.

  • Using a heat gun will allow you to melt the adhesive in about 30 seconds; whereas a hair dryer will take about 3-5 minutes to melt the adhesive.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可