跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 2

步骤 2
Remove the thirteen black screws and the single silver screw from the back of the phone with a JIS size 00 screwdriver.
Remove the Inner Cover Screws
  • Remove the thirteen black screws and the single silver screw from the back of the phone with a JIS size 00 screwdriver.

  • The black screws are 2.8 mm in length.

  • The silver screw is 5.5 mm in length.

  • The black screw next to the camera and the flash is covered by a sticker. This screw can be easily removed as if there were no sticker on top of it. The point of the screwdriver should be able to pierce through the sticker easily.

使用JIS 00 螺丝刀来移除内壳上13颗黑色的螺丝,以及1颗银色的螺丝。

黑色螺丝2.8mm 长

银色螺丝5.5mm 长

黑色螺丝位于摄像头的附近,闪光灯被贴纸覆盖。 如果螺丝顶上没有贴纸就可以很容易的被移走。 螺丝刀的尖端可能很容易的将贴纸穿过。

在开源创作共享许可协议下,你的投稿已被许可