跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 2

步骤 2
After removing the screws, use a metal spudger or plastic opening tool to push the back cover out. The metal spudger can damage the plastic housing, so use caution when applying any pressure to it. Use a plastic opening tool to reduce the risk of damage to the housing.
  • After removing the screws, use a metal spudger or plastic opening tool to push the back cover out.

  • The metal spudger can damage the plastic housing, so use caution when applying any pressure to it. Use a plastic opening tool to reduce the risk of damage to the housing.

  • Remove the back housing of the camera by lifting it directly up.

  • The back cover may be slightly tight, therefore more force may be needed to lift it up.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可