跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 1

步骤 1
There are six screws attaching the back housing to the camera. Remove the screws from the body with a PH000 screw head. Two 1.5x2.5mm screws on the right side. Two 1.5x2.5mm screws on the underside.
  • There are six screws attaching the back housing to the camera. Remove the screws from the body with a PH000 screw head.

  • Two 1.5x2.5mm screws on the right side.

  • Two 1.5x2.5mm screws on the underside.

  • Two 1.5x2.5mm screw on the left side.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可