跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Use a heating tool such as an iOpener or Heat gun around the edges of the Amazon Fire's glass screen. The iOpener may take longer to use. However, a heat gun can warp the plastic if used incorrectly. As you heat the edges, use a separator tool such as a guitar pick  to  lift the glass panel up and hold it up as you work around the device. Do not use a separation tool on the top edge of the device where the front camera would be; the digitizer cable is located in this location and can easily be severed. Instead, work in a U shape until you have 3 sides lifted from the frame
  • Use a heating tool such as an iOpener or Heat gun around the edges of the Amazon Fire's glass screen. The iOpener may take longer to use. However, a heat gun can warp the plastic if used incorrectly.

  • As you heat the edges, use a separator tool such as a guitar pick to lift the glass panel up and hold it up as you work around the device.

  • Do not use a separation tool on the top edge of the device where the front camera would be; the digitizer cable is located in this location and can easily be severed. Instead, work in a U shape until you have 3 sides lifted from the frame

  • Be patient with this step because it can be very time consuming and remember to use proper safety gear when using a heating device.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可