跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Using a Phillips 2 screwdriver, remove the three 20.0mm screws holding the motor assembly in place. Use your hands to remove the motor assembly. Use your hands to hold the eject button from one side while using the other hand to remove the circuit board.
  • Using a Phillips 2 screwdriver, remove the three 20.0mm screws holding the motor assembly in place.

  • Use your hands to remove the motor assembly.

  • Use your hands to hold the eject button from one side while using the other hand to remove the circuit board.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可