跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 1

步骤 1
Flip the toy over to gain direct access to the first screws you need to remove for the replacement. Remove the two (2) 7.5mm phillips screws using Phillips #1 screwdriver from the bottom of the jaw.
  • Flip the toy over to gain direct access to the first screws you need to remove for the replacement.

  • Remove the two (2) 7.5mm phillips screws using Phillips #1 screwdriver from the bottom of the jaw.

  • Remove the two (2) 7.2mm phillips screws using Phillips #0 screwdriver from the bottom of the jaw.

  • Gently remove the entire bottom jaw piece.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可