跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
中文

正翻译步骤 6

步骤 6
Insert a 1.2 mm Phillips screw into each of the outer holes drilled into the trackpad (two screws total).
  • Insert a 1.2 mm Phillips screw into each of the outer holes drilled into the trackpad (two screws total).

  • You'll install the rest in a bit.

  • Tighten the screws, then back them out about a quarter turn to aid in aligning your trackpad during the next few steps.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可