菜单

你的设置

我的工作台

快速访问设备的指南，配件和论坛
我的购物车

购物车是空的

浏览我们的商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南。

返回指南
英语
中文

正翻译步骤 1

步骤 1
Be careful not to damage any of the headphone or battery ribbon cables while performing this step. Insert an iPod opening tool in between the metal case and battery at the location illustrated by the picture. Gently wiggle the tool while pushing it further in between the battery and back case. The adhesive holding the battery should give, allowing the battery to be removed from the rear panel.

  • Be careful not to damage any of the headphone or battery ribbon cables while performing this step.

  • Insert an iPod opening tool in between the metal case and battery at the location illustrated by the picture.

  • Gently wiggle the tool while pushing it further in between the battery and back case. The adhesive holding the battery should give, allowing the battery to be removed from the rear panel.

执行此步骤时，请小心不要损坏任何耳机或连接电池带状的电缆。

将iPod开口工具插入金属外壳和电池之间的图片所示的位置。

轻轻摇动工具，同时将其推入电池和后盖之间。 粘着电池的粘合剂应该给，允许电池从后面板被去除。

在开源创作共享许可协议下，你的投稿已被许可。