跳转到主内容

Fix Your Stuff

Right to Repair

Parts & Tools

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 7

步骤 7
The display should now be free of the body of the Surface Pro. Lift it up and away from the rest of the device. Before installing a new display, check it carefully to see if any parts need to be transferred over from the back of the old display to the new display. In particular, you may need to transfer over the NTrig board in the corner by disconnecting the two attached ribbon cables and using heat and gentle prying to carefully separate the glue securing the board. To replace the adhesive securing the display, carefully remove any old adhesive from both the device and the back of the display. Clean and prep the surface with isopropyl alcohol and a lint-free cloth, swiping the cloth in one direction (not back and forth). Apply a strong double-sided tape, such as 2 mm Tesa 61395.
  • The display should now be free of the body of the Surface Pro. Lift it up and away from the rest of the device.

  • Before installing a new display, check it carefully to see if any parts need to be transferred over from the back of the old display to the new display. In particular, you may need to transfer over the NTrig board in the corner by disconnecting the two attached ribbon cables and using heat and gentle prying to carefully separate the glue securing the board.

  • To replace the adhesive securing the display, carefully remove any old adhesive from both the device and the back of the display. Clean and prep the surface with isopropyl alcohol and a lint-free cloth, swiping the cloth in one direction (not back and forth). Apply a strong double-sided tape, such as 2 mm Tesa 61395.

此时就可以将显示屏从设备上解放了。向上抬起并从设备上移开显示屏。

在安装新的显示屏之前,认真查看是否有零件需要从旧显示屏的后部转移到新的显示屏。特别要注意的是,你要转移有连接排线的角落的NTrig板并且使用热风枪,然后轻轻地分离固定主板的胶水。

如果要更换用于固定屏幕的黏合剂,请小心地从设备上和屏幕背面清理掉原有的黏合剂。使用异丙醇与无绒布往同一个方向擦拭(而不是前后擦拭)。黏合剂需要选用强力的双面胶,比如 2 毫米的 Tesa 61395

在开源创作共享许可协议下,你的投稿已被许可