跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 3

步骤 3
Use a suction cup or an iSclack to pull up on the glass and create a slight gap between the glass and the metal frame. If your display is badly cracked, a suction cup may not adhere. It may help to first cover the display with a layer of packing tape. Alternatively, you can superglue your suction cup to the display. Insert an opening pick into the gap.
  • Use a suction cup or an iSclack to pull up on the glass and create a slight gap between the glass and the metal frame.

  • If your display is badly cracked, a suction cup may not adhere. It may help to first cover the display with a layer of packing tape. Alternatively, you can superglue your suction cup to the display.

  • Insert an opening pick into the gap.

  • There are tabs on the upper right side and upper left side where it is easier to get a tool under the display.

  • Slide an opening pick around the sides and bottom of the display to cut the adhesive. Apply more heat as needed.

  • The tape is much thinner on the bottom edge than the other three sides. Do not push the tool in too far or you will damage the screen permanently.

  • Work carefully—the glass is thin and will crack easily if you try to force it.

  • Separate the top edge last. There are antennas on both sides, so be careful not to damage them. If needed, you can use a bit of isopropyl alcohol to help weaken the adhesive.

使用吸盘或iSclack拉起玻璃,使玻璃和金属框架之间分离出一个微小的缝隙。

如果你的显示屏碎得很彻底,吸盘可能吸不上。这时在屏幕上贴上一层胶布可能有所帮助。或者你可以用强力胶把你的吸盘固定到显示屏上。

在缝隙中塞进一个拨片。

根据右上方和左上方的标签你可以很顺利的在屏幕下方找到工具。

环绕整个屏幕滑动拨片来划开粘合胶。如果需要的话可以再加热一下。

底部的胶带比其他三侧要薄很多,不要将工具向里推进太多,否则有可能对屏幕造成永久损害。

小心一点,玻璃很薄,用力的话很容易碎掉。

最后分离屏幕顶部边缘。顶部两侧都有天线,请注意不要损坏它们。如果有必要,你可以是用少许异丙醇来弱化黏合剂的黏着力。

在开源创作共享许可协议下,你的投稿已被许可