跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
Insert a 1.4 mm Y0 Tri-wing screw into each of the outer holes drilled into the trackpad (two screws total).
  • Insert a 1.4 mm Y0 Tri-wing screw into each of the outer holes drilled into the trackpad (two screws total).

  • You'll install the rest in a bit.

  • Tighten the screws all the way, then back them out about a quarter turn to aid in aligning your trackpad during the next few steps.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可