跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的9指南

英语
日语

正翻译步骤 3

步骤 3
Tilt the opening pick to lift the rear panel a little bit. There are two more plastic clips next to the fingerprint sensor. Release them by gently pulling the rear panel.
  • Tilt the opening pick to lift the rear panel a little bit.

  • There are two more plastic clips next to the fingerprint sensor. Release them by gently pulling the rear panel.

  • Remove the rear panel.

開口ピックをわずか斜めにひねり上げて、リアパネルを掴める程度まで開きます。

指紋認証センサーの隣にあるプラスチック製クリップからリアパネルが解放されるまでゆっくりと開きます。

リアパネルを取り外します。

-[* black] Tilt the opening pick to lift the rear panel a little bit until you can get a good grip.
-[* black] Gently detach the rear panel from the plastic clips next to the fingerprint sensor.
+[* black] Tilt the opening pick to lift the rear panel a little bit.
+[* black] There are two more plastic clips next to the fingerprint sensor. Release them by gently pulling the rear panel.
[* black] Remove the rear panel.

在开源创作共享许可协议下,你的投稿已被许可