Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 1

Step 1
Set the motherboard assembly down so that the lower LCD is side-by-side with the motherboard. Use the tip of a spudger or your fingers to peel back the white tape covering the touchscreen ribbon cable connector. Use the tip of a spudger or your fingers to peel back the white tape covering the touchscreen ribbon cable connector.
  • Set the motherboard assembly down so that the lower LCD is side-by-side with the motherboard.

  • Use the tip of a spudger or your fingers to peel back the white tape covering the touchscreen ribbon cable connector.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可