跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Remove the flash bulb from the red housing and clear cover. Do this by pushing back the flash bulb back out of the red housing. When reassembling make sure the tab on the flash cover faces up. Desolder the wires from the circuit board. Learn more about soldering here.
  • Remove the flash bulb from the red housing and clear cover. Do this by pushing back the flash bulb back out of the red housing.

  • When reassembling make sure the tab on the flash cover faces up.

  • Desolder the wires from the circuit board. Learn more about soldering here.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可