修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 3

步骤 3
As the adhesive loosens, pry up an edge of the screen with a plastic opening tool or an opening pick. A suction cup may also be useful here. Use an opening pick to hold that edge in place and continue this process around the entire screen, applying more heat as necessary. Avoid damaging the LCD screen connector while prying along the screen edges. It is located on the left edge of the phone, across from the volume controls.

  • As the adhesive loosens, pry up an edge of the screen with a plastic opening tool or an opening pick. A suction cup may also be useful here.

  • Use an opening pick to hold that edge in place and continue this process around the entire screen, applying more heat as necessary.

  • Avoid damaging the LCD screen connector while prying along the screen edges. It is located on the left edge of the phone, across from the volume controls.

  • During reassembly, new adhesive may need to be applied over the old adhesive to properly secure the screen.

粘合剂松动后，使用塑料打开工具或者塑料撬片撬起屏幕一角。 吸盘也能帮上忙.。

使用塑料撬片固定一角，继续在屏幕四周进行这个操作，如果有必要的话请加热屏幕。

避免在屏幕边缘撬动时损坏LCD屏幕排线插头。 它位于手机的左边缘，音量控制按键 的正对面。

在重组时，新的粘合剂可能要贴合在旧的粘合剂之上来保证屏幕的贴合。

在开源创作共享许可协议下，你的投稿已被许可。