跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

步骤 2
Remove the lens housing by pushing it, from the front, through the housing and lifting it out. Gently pull on the large ribbon wire (connecting the Lens housing to the motherboard via ZIF connector) with the tweezers. Gently pull on the small ribbon wire (connecting the Lens housing to the motherboard) with the tweezers.
  • Remove the lens housing by pushing it, from the front, through the housing and lifting it out.

  • Gently pull on the large ribbon wire (connecting the Lens housing to the motherboard via ZIF connector) with the tweezers.

  • Gently pull on the small ribbon wire (connecting the Lens housing to the motherboard) with the tweezers.

  • Be careful not to damage either of the ribbon wires.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可