跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Use the tweezers. Move the thick red cable, attached to the secondary board, outside of its place in the camera housing. Gently pull on the red/black wire in order to free the photo lens cylinder from the housing. Remove the secondary board from its position and move it upward, out of the way.
  • Use the tweezers. Move the thick red cable, attached to the secondary board, outside of its place in the camera housing.

  • Gently pull on the red/black wire in order to free the photo lens cylinder from the housing.

  • Remove the secondary board from its position and move it upward, out of the way.

  • From this point on, do not damage the connection between the motherboard and the secondary board.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可