Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的15指南

英语
中文

正翻译步骤 3

Step 3
Lift the inner edge of the optical drive and maneuver its connector past the GPU frame attached to the logic board. Carefully pull the optical drive off its mounting pins on the right side of the outer case to gain clearance for disconnecting the optical drive cable.
  • Lift the inner edge of the optical drive and maneuver its connector past the GPU frame attached to the logic board.

  • Carefully pull the optical drive off its mounting pins on the right side of the outer case to gain clearance for disconnecting the optical drive cable.

  • Allow the optical drive to hang down as you de-route the optical drive thermal sensor connector from behind the GPU heat sink.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可