跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
西班牙语

正翻译步骤 5

步骤 5
  • The volume and power buttons must both be repositioned in order to remove the motherboard.

  • To reposition the power and volume buttons, use the iFixit Opening Tool to pull the plastic casing upwards. Then, remove the casing completely.

  • Make sure that both the volume and the power buttons are free from the plastic casing before separating the motherboard from its case.

  • Be very careful when repositioning the volume buttons, since the fragile digitizer ribbon cable runs from the motherboard to the digitizer right next to the volume buttons. It is very easy to damage the ribbon cable while working in this area.

Los botones de volumen y encendido deben ser reposicionados para poder remover la placa madre.

Para volver a colocar los botones de encendido y volumen, usa la herramienta de apertura de iFixit para halar la carcasa de plástico hacia arriba. Luego, retira la carcasa por completo.

Asegúrate que tanto el botón de volumen como el de encendido estén liberados de la carcaza de plástico antes de separar la placa madre de la carcaza.

[* black] The volume and power buttons must both be repositioned in order to remove the motherboard.
[* black] To reposition the power and volume buttons, use the iFixit Opening Tool to pull the plastic casing upwards. Then, remove the casing completely.
[* icon_note] Make sure that both the volume and the power buttons are free from the plastic casing before separating the motherboard from its case.
+[* icon_caution] Be very careful when repositioning the volume buttons, since the fragile digitizer ribbon cable runs from the motherboard to the digitizer right next to the volume buttons. It is very easy to damage the ribbon cable while working in this area.

在开源创作共享许可协议下,你的投稿已被许可