修复你的物品

维修的权力

商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 3

步骤 3
Carefully lift the power supply out of the outer case and rotate it to expose the cable lock as shown, minding the DC-Out and AC-In cables still attaching it to the iMac. Disconnect the DC-Out cable by depressing the locking mechanism on the connector while you pull the connector away from its socket on the power supply.

  • Carefully lift the power supply out of the outer case and rotate it to expose the cable lock as shown, minding the DC-Out and AC-In cables still attaching it to the iMac.

  • Disconnect the DC-Out cable by depressing the locking mechanism on the connector while you pull the connector away from its socket on the power supply.

  • Once the locking mechanism has cleared the socket, pull the DC-In connector away from the power supply.

小心地將電源從機殼中取出並旋轉它以露出電纜接頭，如圖所示；注意DC-Out和AC-In電纜仍然連接在iMac。

在將電纜接頭從電源插座上拔出時，按下電纜接頭上的鎖定機構，來分開DC-Out電纜。

一旦鎖定機構與插座分離，就可將DC-In連接器拉離電源。

在开源创作共享许可协议下，你的投稿已被许可。