修复你的物品

维修的权力

商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。

返回指南
英语
中文
下一步

正翻译步骤 1

步骤 1
The next few steps bring your hands close to the exposed face of the power supply. To avoid a high voltage shock from the many large capacitors attached to the board, do not touch the face of the power supply.

  • The next few steps bring your hands close to the exposed face of the power supply. To avoid a high voltage shock from the many large capacitors attached to the board, do not touch the face of the power supply.

  • Remove the following four screws securing the power supply to the outer case:

  • One 9.3 mm T10 coarse-threaded screw

  • One 25 mm T10 coarse-threaded screw

  • Two 22 mm T10 fine-threaded screws

接下來的幾個步驟將您的手靠近電源的暴露面。 為避免連接到電路板上的許多大電容器產生高壓衝擊，請勿觸摸電源表面。

卸下以下四個螺釘，將電源與外殼分離

一個9.3mm T10粗螺紋螺釘

一個25mm T10粗螺紋螺釘

兩個22mm T10細螺紋螺釘

在开源创作共享许可协议下，你的投稿已被许可。