注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的9指南。
正翻译步骤 13
步骤 13
-
Remove the following four screws:
-
One 9.3 mm T10 coarse-threaded screw
-
One 25 mm T10 coarse-threaded screw
-
Two 22 mm fine-threaded screws
-
Pull the upper right and lower left corners of the power supply away from the rear case to dislodge the mounting posts attached to the power supply's corners.