Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的9指南

英语
中文

正翻译步骤 10

Step 10
Use your thumbs to push the IR sensor connector toward the top edge of the iMac and out of its socket on the logic board. Pull the IR sensor board up from behind the front face of the outer case.
  • Use your thumbs to push the IR sensor connector toward the top edge of the iMac and out of its socket on the logic board.

  • Pull the IR sensor board up from behind the front face of the outer case.

  • Remove the IR sensor and set it aside.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可