跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Use tweezers, inspect the main output gear for the jaw and remove if necessary. Remove the four (4) 4.9mm screws from the other side of the assembly. Use a spudger to gently pry apart the assembly for inspection.
  • Use tweezers, inspect the main output gear for the jaw and remove if necessary.

  • Remove the four (4) 4.9mm screws from the other side of the assembly.

  • Use a spudger to gently pry apart the assembly for inspection.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可