跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 2

步骤 2
Lift the camera board out of the outer case, minding the cable attaching it to the logic board.
  • Lift the camera board out of the outer case, minding the cable attaching it to the logic board.

  • Disconnect the camera board by pulling its connector away from the socket on the camera board.

  • Before reinstallation, be sure that the thermal putty applied to the camera's heat sink is thick enough to make contact with the outer case.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可