修复你的物品

维修的权力

配件 & 工具

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的15指南。

返回指南
英语
法语
上一步 下一步

正翻译步骤 4

步骤 4
Remove following two screws: Take care, as these screws are unusually easy to strip. Apply firm pressure while unscrewing. Read comments before proceeding.

  • Remove following two screws:

  • Take care, as these screws are unusually easy to strip. Apply firm pressure while unscrewing. Read comments before proceeding.

  • One 8.6 mm Phillips screw

  • One 3.9 mm Phillips screw

  • Carefully rotate the AirPort/Bluetooth board housing (with AirPort/Antenna cables still attached) out of the lower case.

Retirez les deux vis suivantes :

Soyez prudents ! La tête de ces vis est très fragile. Exercez une pression suffisante lorsque vous dévissez. Lisez les commentaires avant de procéder.

Une vis Phillips 8,6 mm.

Une vis Phillips 3,9 mm.

Avec précaution, faites pivoter la carte AirPort/Bluetooth (avec les câbles AirPort/d'antenne toujours connectés) hors du boîtier inférieur

[* black] Remove following two screws:
[* icon_caution] Take care, as these screws are unusually easy to strip. Apply firm pressure while unscrewing. Read comments on the right before proceeding.
[* icon_caution] Take care, as these screws are unusually easy to strip. Apply firm pressure while unscrewing. Read comments on the right before proceeding.
[* red] One 8.6 mm Phillips screw
[* orange] One 3.9 mm Phillips screw
[* black] Carefully rotate the AirPort/Bluetooth board housing (with AirPort/Antenna cables still attached) out of the lower case.

在开源创作共享许可协议下，你的投稿已被许可。