修复你的物品

维修的权力

商店

注：你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 4

步骤 4
Now gently separate the metal bezel from the main body of the LCD panel Lay the LCD panel down on with viewing side UP and remove the metal bezel Make sure you are careful when removing the bezel from the TOP edge as you will be exposing the 8 flex cables mentioned in step 1.

  • Now gently separate the metal bezel from the main body of the LCD panel

  • Lay the LCD panel down on with viewing side UP and remove the metal bezel

  • Make sure you are careful when removing the bezel from the TOP edge as you will be exposing the 8 flex cables mentioned in step 1.

  • Note the 3 flex tabs on the left edge

  • Do not damage any of the tabs or flex cables as these are the Row and Column Drivers. Damage to these will will cause faults like vertical/horizontal lines or white screen etc.

  • WARNING - Once the bezel is removed the LCD is LOOSE in the black plastic frame - only held in by the small gasket underneath.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下，你的投稿已被许可。